D-Link DGS-3426P Product Manual - Page 77
DHCPv6 Relay, DHCPv6 Relay Global Settings
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch VID List Display the VLAN list. Click Apply to implement the changes. DHCPv6 Relay This section contains information for configuring DHCPv6 relay, including DHCP v6 Relay Global Settings and DHCPv6 Relay Interface Settings. DHCPv6 Relay Global Settings This window is used to set up the DHCPv6 relay global status. To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Global Settings as shown below. Figure 2 - 71 DHCPv6 Relay Global Settings window The following fields can be configured: Parameter Description Global State This field can be toggled between Enabled and Disabled using the pull-down menu. It is used to enable or disable the DHCPv6 Relay service on the Switch. The default is Disabled. Hops Count (1-32) This field allows an entry between 1 and 32 to define the maximum number of router hops DHCPv6 messages can be forwarded across. The default hop count is 4. Click Apply to implement the changes. DHCPv6 Relay Interface Settings This window displays the current DHCPv6 relay configurations. To view this window, click Administration > DHCPv6 Relay > DHCPv6 Relay Interface Settings as shown below. Figure 2 - 72 DHCPv6 Relay Interface Settings window 68