D-Link DGS-3426P Product Manual - Page 203

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 3 - 59 Setup Static Multicast Forwarding Table window The following parameters can be set: Parameter Description Unit Select the switch in the switch stack to be modified. VID The VLAN ID of the VLAN the corresponding MAC address belongs to. Multicast MAC Address The MAC address of the static source of multicast packets. This must be a multicast MAC address. Port Settings Allows the selection of ports that will be members of the static multicast group and ports that are either forbidden from joining dynamically, or that can join the multicast group dynamically, using GMRP. The options are: None - No restrictions on the port dynamically joining the multicast group. When None is chosen, the port will not be a member of the Static Multicast Group. Egress - The port is a static member of the multicast group. Click Apply to implement the changes made. Click the Show All Multicast Forwarding Entries link to return to the Static Multicast Forwarding Settings window. Multicast Filtering Mode This window allows users to configure the Switch to forward or filter the Unregistered Groups per VLAN. To view this window, click L2 Features > Forwarding & Filtering >Multicast Filtering Mode, as shown below. Figure 3 - 60 Multicast Filtering Mode Settings window The following parameters can be set: 194