D-Link DGS-3426P Product Manual - Page 76

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch To remove an entry, enter the appropriate MAC Address or String information and click Delete. To delete all entries click Clear All. To add a new entry click Add the following window will appear. Figure 2 - 69 DHCP Relay Option 61 Table - Add window The following parameters can be configured: Parameter Description Client ID Click the radio buttons to select the method of identification for the Client ID either MAC Address or String. The MAC Address will specify the hardware address of the client and the String will specify the client ID. Choose a method and enter the appropriate information into the box provided. Relay Rule Click the radio buttons to choose either Relay or Drop. When drop is specified, the packet with no matching rules found will be dropped without further process. When relay is selected the packet will be relayed based on the relay rules. Choose a method and enter the appropriate information into the box provided. Click Apply to implement the changes. DHCP/BOOTP Local Relay Settings This window is used to configure the global settings of DHCP/BOOTP local relay. To view this window, click Administration > DHCP/BOOTP Local Relay Settings, as shown below. Figure 2 - 70 DHCP/BOOTP Local Relay Global Settings window The following parameters are displayed or can be configured: Parameter Description Global State Use the pull-down menu to enable or disable the status. VLAN State Use the pull-down menu to enable or disable the VLAN status. VLAN Name Enter the name of VLAN. 67