D-Link DGS-3426P Product Manual - Page 60

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Target IP Address Domain Name Repeat Times Timeout Source IP Address Click the radio button and enter the Target IP Address to be pinged. Click the radio button and enter the domain name of the host. The user may use the Infinite times radio button, in the Repeat Pinging for field, which will tell the ping program to keep sending ICMP Echo packets to the specified IP address until the program is stopped. The user may opt to choose a specific number of times to ping the Target IP Address by clicking its radio button and entering a number between 1 and 255. Select a timeout period between 1 and 99 seconds for this Ping message to reach its destination. Tick the check box and enter the source IP address of the ping packets. Click Start to initiate the Ping program. IPv6 Ping Test The following window is used to Ping an IPv6 address. To view this window, click Administration > Ping Test > IPv6 Ping Test, as shown below. Figure 2 - 46 IPv6 Ping Test window This window allows the following parameters to be configured to ping an IPv6 address. Parameter Description Target IPv6 Address Enter an IPv6 address to be pinged. Interface The Interface field is used for addresses on the link-local network. It is recommended that the user enter the specific interface for a link-local IPv6 address. For Global IPv6 addresses, this field may be omitted. 51