D-Link DGS-3426P Product Manual - Page 159

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 3 - 13 Double VLAN State Settings - View window Parameters shown in the previous window are explained below: Parameter Description SPVID VLAN Name TPID Uplink Ports Access Ports Unknown Ports The VLAN ID number of this potential Service Provider VLAN. The name of the VLAN on the Switch. The tagged protocol ID of the corresponding VLAN that will be used in identification of this potential Double VLAN, written in hex form. These ports are set as uplink ports on the Switch. Uplink ports are for connecting Switch VLANs to the Service Provider VLANs on a remote source. These are the ports that are set as access ports on the Switch. Access ports are for connecting Switch VLANs to customer VLANs. These are the ports that are a part of the VLAN but have yet to be defined as Access or Uplink ports. To return to the Double VLAN State Settings window, click the Show Double VLAN Entries link. To create a Double VLAN, click the Add button, revealing the following window for the user to configure. Figure 3 - 14 Double VLAN State Settings - Add window To create a Double VLAN, enter the following parameters and click Apply. Parameter Description VLAN Name SPVID TPID Enter the pre-configured VLAN name to create as a Double VLAN. Enter the VID for the Service Provider VLAN with an integer between 1 and 4094. Enter the TPID in hex form to aid in packet identification of the Service Provider VLAN. Click Apply to implement the changes. To return to the Double VLAN State Settings window, click the Show Double VLAN Entries link. 150