D-Link DGS-3426P Product Manual - Page 50

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 2 - 36 Time Settings window The following parameters are displayed or can be configured: Parameter Description Time Settings - Current Time System Boot Time Displays the time when the Switch was initially started for this session. Current Time Displays the Current Time. Time Source Displays the time source for the system. SNTP Settings SNTP State Use this pull-down menu to Enabled or Disabled SNTP. SNTP Primary Server The IP address of the primary server from which the SNTP information will be taken. SNTP Secondary Server The IP address of the secondary server from which the SNTP information will be taken. SNTP Poll Interval in Seconds (30-99999) The interval, in seconds, between requests for updated SNTP information. Time Settings - Set Current Time Year Enter the current year, to update the system clock. Month Enter the current month, to update the system clock. Day Enter the current day, to update the system clock. Time in HH MM SS Enter the current time in hours, minutes, and seconds. Click Apply to implement your changes. Time Zone and DST The following window is used to configure time zone and daylight savings time settings for SNTP. 41