D-Link DGS-3426P Product Manual - Page 189
Loopdetect Trap, Interval 1-32767, Recover Timer 0 or, Port Settings, Administration
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Loopdetect Trap None - The trap will not be sent in any situation. Loop Detected - The trap is sent when the loop condition is detected. Loop Cleared - The trap is sent when the loop condition is cleared. Both - The trap will be sent for both conditions. Interval (1-32767) Enter a time interval, between 1 and 32767 seconds, that CTP packets will be dispatched from loop-back detection-enabled ports. The default setting is 10 seconds. Recover Timer (0 or 60-1000000) Enter a time, in seconds that a port will have to wait before being recovered from a loop-back detection shutdown. The user may set a time between 60 and 1000000 seconds with a default setting of 60 seconds. The user may also enter a time of 0, which means that the port can only be recovered manually by the user. This is done by going to the Port Settings window (Administration > Port Configuration) and manually enabling these ports. Mode Use the pull-down menu to select Port Based or VLAN Based. Unit Select the switch in the switch stack to be modified. From / To Choose a port or group of ports that are to be enabled for the loop-back detection function. State Use the pull-down menu to enable or disable the loop-back function for the selected ports. Click Apply to implement the changes. 180