D-Link DGS-3426P Product Manual - Page 110

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Users now have the choice of adding an IPv4 or an IPv6 host to the SNMP host table. To add a new IPv4 entry to the Switch's SNMP Host Table, click the Add IPv4 Host button in the upper left-hand corner of the window. This will open the SNMP Host Table Configuration window, as shown below. Figure 2 - 122 SNMP Host Table - Add IPv4 Host window The following parameters can be configured: Parameter Description Host IPv4 Address Type the IPv4 address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - This specifies that SNMP version 1 will be used. V2 - To specify that SNMP version 2 will be used. V3-NoAuth-NoPriv - To specify that the SNMP version 3 will be used, with a NoAuth-NoPriv security level. V3-Auth-NoPriv - To specify that the SNMP version 3 will be used, with an Auth-NoPriv security level. V3-Auth-Priv - To specify that the SNMP version 3 will be used, with an Auth-Priv security level. Community String / Type in the community string or SNMP V3 user name as appropriate. SNMP V3 User Name Click Apply to implement the changes. To return to the SNMP Host Table window, click the Show All SNMP Host Table Entries link. To add a new IPv6 entry to the Switch's SNMP Host Table, click the Add IPv6 Host button in the upper left-hand corner of the window. This will open the SNMP Host Table Configuration window, as shown below. Figure 2 - 123 SNMP Host Table - Add IPv6 Host window The following parameters can be configured: Parameter Description Host IPv6 Address Type the IPv6 address of the remote management station that will serve as the SNMP host for the Switch. SNMP Version V1 - To specifies that SNMP version 1 will be used. 101