D-Link DGS-3426P Product Manual - Page 143

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Expire Time (1-65535) Enter the value (in seconds) of the expire time. Garbage Collection Time (1-65535) Enter the value (in seconds) of the garbage-collection timer. Click Apply to implement changes made. RIPng Interface Settings This window allows users to configure RIPng interface settings. To globally enable RIP ng on the Switch, click Administration > RIP > RIPng > RIPng Interface Settings, as shown below. Figure 2 - 165 RIPng Interface Settings window To modify an entry, click the corresponding Modify button to see the window, as shown below. Figure 2 - 166 RIPng Interface Settings - Edit window The following settings can be configured: Parameter Description Interface Name The name of the interface for the RIPng configuration. State Enable or disable the RIPng state on the specific IP interface. If the state is Disabled, then RIPng packets will not be transmitted or received by the interface. The default setting is Disabled. Metric Enter the cost value of an interface. The RIPng route that was learned from the interface will add this value as a new route metric. The default value is 1. Click Apply to implement changes made. 134