D-Link DGS-3426P Product Manual - Page 95

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch RSPAN Settings This window allows the user to search for a previously created VLAN and to view the RSPAN settings for it. To view this window, click Administration > RSPAN > RSPAN Settings, as shown below. Figure 2 - 99 RSPAN Settings window The following fields can be configured: Parameter Description VLAN Name Enter the name of the VLAN you wish to Add, Find or Delete. VID (1-4094) Enter the VLAN ID of the VLAN you wish to Add, Find or Delete. Target Port The target port that receives the packets duplicated at the source port. RX Source Ports The goal of RX source ports is to monitor as much as possible all the packets received by the source interface or VLAN before any modification or processing is performed by the switch. A copy of each packet received by the source is sent to the destination port for that RSPAN session. TX Source Ports The goal of TX source ports is to monitor as much as possible all the packets sent by the source interface after all modification and processing is performed by the switch. Redirect Port RSPAN redirect function will work when RSPAN is enabled and at least one RSPAN VLAN has been configured with redirect ports. To remove an entry, use the radio button to enter VLAN name or VLAN ID in the field, and click the corresponding Delete by VLAN or Delete By VID icon. To search for an entry, use the radio button to enter VLAN name or VLAN ID in the field, and click the Find by VLAN or Find by VID button. To modify an existing entry of its redirect settings, click the corresponding Modify button in Modify Redirect, revealing the following window to configure: 86