D-Link DGS-3426P Product Manual - Page 278

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 5 - 41 CPU Interface Filtering Rule Configuration window (IP) Configure the following Access Rule Configuration settings for IP: Parameter Description Profile ID This is the identifier number for this profile set. Mode Select Permit to specify that the packets that match the access profile are forwarded by the Switch, according to any additional rule added (see below). Select Deny to specify that packets that match the access profile are not forwarded by the Switch and will be filtered. Access ID Type in a unique identifier number for this access. This value can be set from 1 to 100. Type Specifies the type of profile that is being created. VLAN Name Allows the entry of a name for a previously configured VLAN. Source IP Source IP Address - Enter an IP Address mask for the source IP address. Destination IP Destination IP Address - Enter an IP Address mask for the destination IP address. DSCP (0-63) This field allows the user to enter a DSCP value in the space provided, which will instruct the Switch to examine the DiffServ Code part of each packet header and use this as the, or part of the criterion for forwarding. The user may choose a value between 0 and 63. Port Enter a port or range of ports. Time Range Click the check box and enter the name of the Time Range settings that has been previously configured in the Time Range Settings window. This will set specific times when this access rule will be implemented on the Switch. Click Apply to implement the changes. To view the settings of a previously correctly configured rule, click View in the CPU Interface Filtering Rule Table to view the following window: 269