D-Link DGS-3426P Product Manual - Page 59

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Download Configuration, Upload Configuration, Upload Log, and Upload Attack Log. RCP Server IPv4 Enter the IP address of the RCP Server. Address User Name Enter the remote user name on the RCP server. Local File Name Enter the file name in the field. Tick the Increment, and the existing configuration will not be cleared before applying the new configuration. Unit Number Select the switch in the switch stack from which, or to which to upload or download files. Tick the ALL check box to denote all switches in the switch stack. Image ID Use the pull-down menu to select the Image file ID. Configuration ID Filter Use the pull-down menu to select the configuration file ID. This is used to filter the configuration data that relates to upload configuration. Click Apply to implement the changes. Ping Test Ping is a small program that sends ICMP Echo packets to the IP address you specify. The destination node then responds to or "echoes" the packets sent from the Switch. This is very useful to verify connectivity between the Switch and other nodes on the network. IPv4 Ping Test The following window is used to Ping an IPv4 address. To view this window, click Administration > Ping Test > IPv4 Ping Test as shown below. Figure 2 - 45 IPv4 Ping Test window The following parameters can be configured: Parameter Description 50