D-Link DGS-3426P Product Manual - Page 74

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Relay IP Address Enter the specified IP address for the DHCP relay forward. Mode Use the pull-down menu to choose either Relay or Drop. When drop is specified, the packet with no matching rules found will be dropped without further process. When relay is selected the packet will be relayed based on the relay rules. Click Add to add a new Relay IP Address entry. Click Apply to implement the changes. To remove any entry, click the corresponding button. DHCP Relay Option 60 Settings This window is used to configure option 60 relay rules on the Switch. Different strings can be specified for the same relay server, and the same string can be specified with multiple relay servers. The system will relay the packet to all the matching servers. To view this window, click Administration > DHCP/BOOTP Relay > DHCP Relay Option 60 Settings, as shown below. Figure 2 - 65 DHCP Relay Option 60 Table window To find a particular entry, enter the correct IP Address or String and click Search. Click the View All button to see all the entries in the table at the bottom half of the window. To delete an entry, enter the appropriate IP address/String and relay IP address information, and click Delete. To delete all the entries, click Clear All. To add a new entry click Add the following window will appear: Figure 2 - 66 DHCP Relay Option 60 Table - Add window The following parameters may be configured: Parameter Description String Enter the specified string, up to a maximum of 255 alphanumeric characters. Server IP Enter the relay server IP address. Match Type Use the drop-down menu to select either Exact Match or Partial Match. 65