D-Link DGS-3426P Product Manual - Page 272

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Figure 5 - 32 CPU Interface Filtering Configuration window (IPv6) The following parameters may be configured for the IP CPU filter. Parameter Profile ID (1-5) Type Class Description Type in a unique identifier number for this profile set. This value can be set from 1 to 5. Select profile based on Ethernet (MAC Address), IP address, IPv6 address or Packet Content Mask. This will change the menu according to the requirements for the type of profile. Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. Select IP to instruct the Switch to examine the IP address in each frame's header. Select Packet Content Mask to specify a mask to hide the content of the packet header. Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header. Checking this field will instruct the Switch to examine the class field of the IPv6 header. This class field is a part of the packet header that is similar to the Type of Service (ToS) or Precedence bits field in IPv4. Flow Label Checking this field will instruct the Switch to examine the flow label field of the IPv6 header. This flow label field is used by a source to label sequences of packets such as non-default quality of service or real time service packets. Source IPv6 Mask The user may specify an IP address mask for the source IPv6 address by checking the corresponding box and entering the IP address mask. Destination IPv6 Mask The user may specify an IP address mask for the destination IPv6 address by checking the corresponding box and entering the IP address mask. Click Apply to set this entry in the Switch's memory. To view the settings of a previously correctly created profile, click View in the CPU Interface Filtering Table window to view the following screen: 263