D-Link DGS-3426P Product Manual - Page 246
Access Profile Entry Display window Ethernet, Parameter, Description, Profile ID 1-6
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 246 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Parameter Profile ID (1-6) Type VLAN Source MAC Destination MAC 802.1p Ethernet Type Description Type in a unique identifier number for this profile set. This value can be set from 1 to 6. Select profile based on Ethernet (MAC Address), IP, Packet Content or IPv6 address. This will change the menu according to the requirements for the type of profile. Select Ethernet to instruct the Switch to examine the layer 2 part of each packet header. Select IP to instruct the Switch to examine the IP address in each frame's header. Select IPv6 to instruct the Switch to examine the IPv6 address in each frame's header. Select Packet Content to instruct the Switch to examine the packet header. Selecting this option instructs the Switch to examine the VLAN identifier of each packet header and use this as the full or partial criterion for forwarding. Source MAC Mask - Enter a MAC address mask for the source MAC address. Destination MAC Mask - Enter a MAC address mask for the destination MAC address. Selecting this option instructs the Switch to examine the 802.1p priority value of each packet header and use this as the, or part of the criterion for forwarding. Selecting this option instructs the Switch to examine the Ethernet type value in each frame's header. Click Apply to implement the changes. To view the settings for a created profile, click its corresponding View button in the Access Profile Table window, revealing the following window: Figure 5 - 4 Access Profile Entry Display window (Ethernet) The window shown below is the IP Access Profile Configuration window: 237