D-Link DGS-3426P Product Manual - Page 184

xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch The following parameters can be configured: Parameter Description MLD Multicast Router Only Use the pull-down menu to enable or disable the MLD multicast router. MLD Snooping Data Driven Learning Settings (1-511) Enter a value between 1 and 511 for data driven max learning entry. Click Apply to implement the changes. Click the corresponding Modify button in the MLD Snooping Settings table to open the window, as shown below. Figure 3 - 41 MLD Snooping Settings - Edit window The following parameters may be viewed or modified: Parameter Description VID This is the VLAN ID that, along with the VLAN Name, identifies the VLAN for which to modify the MLD Snooping Settings. VLAN Name This is the VLAN Name that, along with the VLAN ID, identifies the VLAN for which to modify the MLD Snooping Settings. Query Interval (1-65535) The Query Interval field is used to set the time (in seconds) between transmitting MLD queries. Entries between 1 and 65535 seconds are allowed. Default = 125. Max Response Time (1-25) This determines the maximum amount of time in seconds allowed to wait for a 175