D-Link DGS-3426P Product Manual - Page 53
MAC Notification Settings, TFTP Services, Global Settings, Port Settings
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 53 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch MAC Notification Settings MAC Notification is used to monitor MAC addresses learned and entered into the forwarding database. To view this window, click Administration > MAC Notification Settings, as shown on the right. Global Settings The following parameters may be viewed and modified: Parameter Description State Enable or disable MAC notification globally on the Switch Interval (12147483647 sec) The time in seconds between notifications. History size (1-500) The maximum number of entries listed in the history log used for notification. Up to 500 entries can be specified. Port Settings To change MAC notification settings for a port or group of ports on the Switch, configure the following parameters. Parameter Description Unit From / To State Choose the switch in the switch stack for which to configure these settings. Select a port or group of ports to enable for MAC notification using the pull-down menus. Enable or disable MAC Notification for the ports selected using the pull-down menu. Click Apply to implement the changes. Figure 2 - 38 New MAC Notification Global Settings window TFTP Services Trivial File Transfer Protocol (TFTP) services allow the Switch's firmware to be upgraded by transferring a new firmware file from a TFTP server to the Switch. A configuration file can also be downloaded into the Switch from a TFTP server. Switch configuration settings can be saved and a history and attack log can be uploaded from the Switch to the TFTP server. The Switch 44