D-Link DGS-3426P Product Manual - Page 365
Stacking Device, Module Information, Stacking Device window
UPC - 790069291982
View all D-Link DGS-3426P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 365 highlights
xStack® DGS-3400 Series Layer 2 Gigabit Ethernet Managed Switch Exist Denotes whether a switch does or does not exist in a stack. Priority Displays the priority ID of the Switch. The lower the number, the higher the priority. The box (switch) with the lowest priority number in the stack denotes the Primary Master switch. MAC Address Displays the MAC address of the corresponding switch in the switch stack. PROM Version Shows the PROM in use for the Switch. This may be different from the values shown in the illustration. Runtime Version Shows the firmware version in use for the Switch. This may be different from the values shown in the illustrations. H/W Version Shows the hardware version in use for the Switch. This may be different from the values shown in the illustration. Topology Show the current topology employed using this Switch. My Box ID Displays the Box ID of the Switch currently in use. Master ID Displays the Unit ID number of the Primary Master of the Switch stack. Backup Master Displays the Unit ID of the Backup Master of the switch stack. Box Count Displays the number of switches in the switch stack. Stacking Device This window is used to display the current devices in the Switch Stack. To view this window, click Monitoring > Stacking Device, as shown below. Figure 7 - 3 Stacking Device window Module Information This window displays information about any installed modules. To view this window, click Monitoring > Module Information, as shown below. Figure 7 - 4 Module Information window Module information displayed: Parameter Description ID The slot number where the module is installed. 356