Panasonic WJ-ND400K Operating Instructions - Page 107
Alarm/Control connector and Alarm Connector Timin, and Polarity, Connectors, Active Time, Remarks
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 107 highlights
About Connectors Alarm/Control connector and Alarm Connector Timing and Polarity Connectors Active Time Remarks Alarm input 100 ms or more L active Alarm output The time set on the setup menu L active Network error output Until the network error is cleared, or until the [ERR] button on L active the operation window (browser) is clicked. Alarm reset input 100 ms or more L active Emergency recording input 100 ms or more L active Available disk space warning output From the time of the error occurrence until the time of the L active error output duration* HDD error output From the time of the error occurrence until the time of the L active error output duration* Camera error output From the time of the error occurrence until the time of the L active error output duration or the camera is reset* Error output From the time of the error occurrence until the time of the L active error output duration* Time adjustment input/output Input: 100 ms or more Output: 1 s Input/Output: L active Alarm suspension input 100 ms or more L active, judged level External recording mode switching 100 ms or more L active Outage detection input 5 s or more L active Power outage recovery completion 10 s or more output H active *The error output timing is set under [Basic] on the settings menu (refer to the Setup Instructions (PDF file)). Note: • During L active (Low active), the logic is enabled when the signal's voltage level is Low. • During H active (High active), the logic is enabled when the signal's voltage level is High. 38