Panasonic WJ-ND400K Operating Instructions - Page 139

Getting started Setting item Description User mng. Maintenance Config. Basic Administrator User Host User level Set whether user and host authentication should be performed. Edit registered administrator information such as the administrator name, password, and start monitor. Edit or delete registered user information and register uses who can operate the recorder. You can also set the operation level, user name, and password. Edit or delete registered host information and register PCs (hosts) that can access the camera over a network. You can also set the operation level and the IP address of the PC. Set the functions available at each user level. Product information Display the version of the software and hardware, the MAC address, serial number, and the internal temperature of the recorder. Disk information Displays information about recording, the disk operational mode, disk space capacity, and the recording area. Network information Display network information such as the camera address set on the recorder and the line speed of the recorder. Disk Set operations for when the HDD is full and perform deletion of data stored on the HDD. Settings management Save, load and initialize the content of the setup menu on the recorder. Disk information Encryption Format Displays information about recording, the disk operational mode, disk space capacity, and the recording area. Configure whether to encrypt the data to be recorded and save onto HDD. Format the HDD and assign Event recording areas and Copy areas to the HDD. Page page 67 page 68 page 69 page 71 page 73 page 75 page 76 page 78 page 79 page 81 page 83 page 85 page 86 10