Panasonic WJ-ND400K Operating Instructions - Page 144

About operating windows Display and close the operating window Operate the recorder from a web browser on a PC. 1 Start the PC. 2 Launch the web browser. 4 Enter a "User name" and "Password" that is registered with the recorder, and click the [Login] button. The top page is displayed. 3 Enter the URL or IP address set for the recorder into the address box and press the [Enter] key. The authentication window is displayed. • If [User authentication] is [Off], the authentication window does not open (page 67). Important: • Refer to your system administrator for the IP address settings. • If the [Host authentication] is [On] (page 71), only PCs that have an IP address that is registered with the recorder can connect to the recorder. For more information, contact your system administrator. • Do not enter "0" on the front of the IP address when inputting it. Example: OK: 192.168.0.50 NG: 192.168.0.050 • Refer to page 96 if a message appears in the information bar. Important: • Refer to your system administrator for the user name and password set for you. Refer to "Users (page 69)" for information about user registration. • The default user name and password settings are shown below. User name: ADMIN Password: 12345 • To ensure security, change the ADMIN password before starting operations. Also, change the password periodically. Refer to page 69 for information about changing passwords. • When the unit is being operated without changing the default administrator name and password, the pop-up window saying that it is recommended to change the password will be displayed. 15