Panasonic WJ-ND400K Operating Instructions - Page 168
Terminal alarm, Terminal alarm settings
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Event Terminal alarm Use the following procedure to configure settings the control alarm action when a terminal alarm occurs. For information on how to register preset positions for the camera, refer to the Operating Instructions. 1 Click the [Event] button on the setup menu. 2 On the sub-menu that appears, click [Terminal alarm]. This will display the terminal alarm setting window. 3 Configure the settings for each item. Refer to "Terminal alarm settings" table for details about the settings. • To configure the settings of a terminal that is not shown on the display, click the terminal number range above the [Set] button to change the contents of the window. • Clicking a terminal number range will save the currently displayed camera settings. 4 Click the [Set] button. Terminal alarm settings Item Rec. cam. Preset position Settings Cam.1 to Cam.64 / -Number input (Blank♦) Output terminal Off / On♦ ♦Initial default Description Specifies the channel of the recording camera. Specifies the preset position (1 to 256) during alarm input. • When this setting is blank, the camera does not move to a preset position. Specifies whether an alarm signal should be output when an event occurs. 39