Panasonic WJ-ND400K Operating Instructions - Page 192
Port forwarding, Specifies whether port forwarding is enabled.
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 192 highlights
♦Initial default *1 Refer to "Recorder network settings (page 11)" for information on initial default settings. Network Important: • A different subnet should be set for each port. • If DHCP is set to [On] and "SD Memory recording" is set, write requests to the camera's SD memory data may fail at startup. This occurs because the response from the DHCP server is slow. Once the address has been obtained from the DHCP server, the error is resolved. Port forwarding Item Port forwarding Port number Settings Off / On♦ Port number input (Camera 1:60001♦ to camera 64:60064♦) ♦Initial default Description Specifies whether port forwarding is enabled. When port forwarding is [On], specifies camera port numbers in the range of 1 to 65535. • Do not specify any of the following numbers for an HTTP port number, FTP port number, site alarm port number, or port forwarding port number. 20, 21, 23, 25, 42, 53, 67, 68, 69, 79, 80, 105, 110, 123, 161, 162, 546, 547, 995, 10001, 10002, 10003, 10004, 10005, 10006, 10007 63