Panasonic WJ-ND400K Operating Instructions - Page 66
PoE Power over Ethernet, NTP Network Time Protocol
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
Glossary IP Masquerading A technology for sharing a single global address between two or more PCs. Allows simultaneous connection of multiple machines to 1 global address to dynamically convert NAT and different TCP/UDP port numbers. IP address The identification number assigned to PCs connected via IP networks such as the Internet or an Intranet, or to individual communications devices. Do not assign the same address to multiple devices, especially on the Internet. Internet PC network that connects networks all over the world. Different types of PCs can communicate over the Internet. LAN A communications network for connecting PCs, printers and other network devices in a relatively small area such as in a building or floor of a building or campus in which data is transferred. M-JPEG Video format in which the camera sends continuous JPEG images. Compared with sending images from the camera one at a time, this method reduces the load on the network. However, the transfer rate may change depending on the status of the camera. Images may be represented as a JPEG depending on the camera. MAC address Fixed physical address assigned to network devices. Devices send and receive data based on this. Manual recording Click the [Recording] button and the [Recording stop] button to manually start and stop recording of video and audio. Multicast A way to send the same data to multiple users specified on a network. Multiscreen Display This recorder can display multiple camera channels simultaneously while displaying live images or playback images. NAT (Network Address Translation) A technology for sharing a single global address between two or more PCs. NTP (Network Time Protocol) A protocol developed to accurately maintain time among hosts on the Internet. POP 3 A protocol for receiving e-mail stored on a server on the Internet or an Intranet. POP 3 Server A server that supports POP3, currently the most widely used mail sending protocol. Plug-in Software Small programs used to add functions to application software. 66 PoE (Power over Ethernet) A technique for supplying power and data simultaneously over an Ethernet cable. PoE was standardized in June, 2003 as "IEEE802.3af". PoE Supplied Hub A switching hub that provides PoE functionality. A maximum of 48 V 15.4 W of power can be supplied to cameras and other devices. Port Number A sub address set below the IP address to connect multiple parties simultaneously for communication (TCP, UDP, etc.) on the Internet. Primary Server DNS servers usually have more than 2 system and the primary server is the main system. Private Address IP address assigned when connecting primarily to LAN. Private IP addresses can be assigned freely on a network and do not require a formal application. However, because private IP addresses cannot be used to access the Internet, a router or other device it is necessary to assign a global IP address. Protocol A set of rules that allows the exchange of data amongst different types PCs with information. The Internet uses the TCP/IP protocol as its base and information is transferred following http and ftp protocols depending on the application. Proxy Server PC or software that connects with the Internet as the proxy for a computer on a local network. It allows special connections from the internal network and blocks unauthorized access from external networks. RAID (RAID5) An abbreviation for Redundant Arrays of Inexpensive Disks 5 that provides a highly reliable disk array by distributing access over multiple HDDs, increasing both speed and capacity. Even if one HDD has errors, data can be recovered based on error correction data recorded on other HDDs. (RAID5 is used when 3 or more HDDs are connected. However, when 2 or more HDDs simultaneously have errors, data cannot be recovered.) RAID (RAID6) An abbreviation for Redundant Arrays of Inexpensive Disks 6 that provides a highly reliable disk array by distributing access over multiple HDDs, increasing both speed and capacity. Even if two HDD has errors, data can be recovered based on error correction data recorded on other HDDs. (RAID6 is used when 4 or more HDDs are connected. However, when 3 or more HDDs simultaneously have errors, data cannot be recovered.) Recording rate (ips, I-Frame) Unit that determines the smoothness when recorded images are played back. "ips" indicates the number of recorded frames in 1 second. When the recording rate is higher, the playback is smoother, but available recording time is reduced. I-Frame indicates the refresh rate set on the camera.