Panasonic WJ-ND400K Operating Instructions - Page 23

Playback Filter conditions Filter Conditions Search Time and date Event Camera Select the starting and ending time and date to search for images recorded during that period. Search only for images of the selected recording mode. Select from the following recording modes. • Manual [MAN] • Schedule [SCH] • Emergency [EMR] • Site alarm [CAM] • Terminal alarm [TRM] • Command alarm [COM] • SD memory recording [SD] : Manual recording (page 18) : Schedule recording (refer to the Setup Instructions (PDF file)) : Emergency recording (refer to the Setup Instructions (PDF file)) : Records according to site alarms (refer to the Setup Instructions (PDF file)) : Records according to terminal alarms (refer to the Setup Instructions (PDF file)) : Records according to command alarms (refer to the Setup Instructions (PDF file)) : SD memory recording (refer to the Setup Instructions (PDF file)) Searches selected camera channels. Rec event list display Number of the list: Displays the total number of the listed data. data When there are more than 10 000 logs, [>10000] is displayed. [All list] button : Removes any conditions and lists, all rec events are listed. [Refresh] button : Updates the display to the most current status. [Prev page] button : Displays the previous page of the list. [Next page] button : Displays the next page of the list. [Time & date] : Start time of recording will be displayed. [Ch] : Displays the channel of the recording camera. [Rec] : Displays the recording mode. [HDD] : Number of the disk where the recorded image is located. [Info] : Additional information will be displayed, when audio is attached. Note: • The rec event list is displayed when the [Refresh] button is pressed, or when searching (page 24, page 25) or when selecting an area (page 26). • The [All list] button is disabled during playback. Stop playback and then do the search operation. • When there are many cameras, the recording start time may vary for each channel. 23