Panasonic WJ-ND400K Operating Instructions - Page 111
Checkin, the IP Address, Camera port, Client PC port, Maintenance port
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
Using the Front Panel for Operations Checking the IP Address You can check the DHCP, IP address, subnet mask, gateway*, and HTTP port* for each port. The following ports are displayed: Camera port: PT #1, Client PC port (PC port): PT #2, and the Maintenance port: PT#3. Use the arrow buttons (left or right) to switch between ports. * Gateway and HTTP port settings are checked under the client PC port (PT #2). The following shows the initial default values for the recorder network settings. Item DHCP IP address Subnet mask Gateway HTTP port Camera port − 192.168.0.250 255.255.255.0 − − Client PC port OFF 192.168.1.250 255.255.255.0 192.168.1.1 80 Maintenance port − 192.168.2.250 255.255.255.0 − − Check the settings by switching between screens using the following operations. The LCD changes as follows when using the arrow buttons (up or down). [SET] [ESC] 42