Panasonic WJ-ND400K Operating Instructions - Page 83
HDD bay slots, RAID mode switch [RAID], Removal knob
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Major Operating Controls and Their Functions (5) HDD bay slots Up to 9 HDD can be installed (one HDD unit is installed at the factory). Note: • Limiting factors for the RAID5/RAID6 mode. RAID5 mode RAID6 mode : The RAID5 mode can be used when more than three HDDs are installed. : The RAID6 mode can be used when more than four HDDs are installed. (6) RAID mode switch [RAID] Switches the HDD operational mode (Single, RAID5, or RAID6). The settings become effective after setting the HDD operation mode with the [RAID] switch and turning on the power while holding down the [USE] button to boot up. S : SINGLE mode (default) R5 : RAID5 mode R6 : RAID6 mode Important: • The HDD operation mode cannot be changed once the system is operating. Recorded data may not be read correctly when the mode is changed after the system is operating. (7) Removal knob Used when replacing the HDD units. 14