Panasonic WJ-ND400K Operating Instructions - Page 174

About the [Measurement] button Clicking the [Measurement] button displays a window that you can use to confirm that the specified rates provide proper operation on the network being used. A red rate setting value indicates that live images or recording of the image may not be possible at the specified rate. Measurement takes about 90 seconds. • When measurement results (total of all camera maximum speeds) are greater than the recorder network speed, heavy network traffic can cause dropping of recorded images, live images, alarms, and other data, degraded operational response, restarts, and other problems. (Guideline network speed: 128 Mbps) • Even when measurement results do not exceed the above guideline network speed, the number of connected cameras and PCs can cause some of the phenomena described above. Important: • Network traffic volume fluctuates depending on the network environment. Set a rate based on measurement results to ensure enough margin for maximum network speed. • Recording, playback, live video, a copying are all disabled while measurement is in progress. Note: • Other users connected to the recorder are logged out automatically during measurement. They are logged back in after measurement is complete. • Measurement results are for reference only. They are subject to change in accordance with the network environment. • The target for measurement is the value after clicking [Set]. • Since the recorder uses a network, network traffic and other factors can make it impossible to obtain live video and recorded images as expected from the setup, slow browser response, or broken connections. Also, recording may not be possible when the recorder is in use or malfunctioning. We are not liable for lost content. Schedules 45