Panasonic WJ-ND400K Operating Instructions - Page 184
Server, NTP
View all Panasonic WJ-ND400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 184 highlights
Server NTP Configures settings for clock adjustment based on an NTP (Network Time Protocol) server. 1 Click the [Server] button on the setup menu. 2 On the sub-menu that appears, click [NTP]. This will display the "NTP Setup" window. 3 Configure the settings for each item. Refer to "NTP settings" table for details about the settings. 4 Click the [Set] button. NTP settings Item Settings Description Time adjustment NTP server address ♦Initial default Off♦ / On Address input (Blank♦) Specifies whether an NTP server is used. Enter the name or IP address of the NTP server. When entering a server name, you must use the DNS. • Enter up to 255 single-byte alpha-numeric characters, including hyphen (-) and period (.). Important: • "Time adjustment" may not operate when the recorder's DHCP setting is [On] and operating, and the time setting for NTP server and recorder are more than 1000 seconds out of sync. • About the NTP Server Function The recorder can operate as a camera's NTP server. When it does, set the port number of the camera to 123. For information about camera settings, refer to the camera operating instructions. 55