Panasonic WJ-ND400K Operating Instructions - Page 47

Transmitting data Transmitting to the FTP server You can transmit camera images to the FTP server. You can either use image transmission by periodic timer [Image transmission by periodic timer] to transmit images periodically to the FTP server or an alarm [Image transmission by alarm] to send camera images to the FTP server during an event. Periodically transmit camera images It is necessary to perform the settings on the setup menu to transmit images from cameras to an FTP server periodically. Set the directory on the destination server, the transmission interval, and the camera channel to transmit images from under [Server] on the setup menu. Also, configure image transmission by periodic timer settings under [Image transmission by periodic timer] on the setup menu. Refer to the Setup Instructions (PDF file) for information about settings. Image transmission by periodic timer cannot be used when the image compression format of the camera channel set in [Image transmission by periodic timer] is [MPEG-4]. Transmit camera images when an event occurs You must configure settings for sending camera images to the FTP server when an event occurs in advance on the setup menu. Configure the settings for the destination server name, and the transmit time of pre-event and post-event images under [Image transmission by alarm] on the setup menu. Also, configure image transmission by alarm settings under [FTP image transmission by alarm] on the setup menu. Refer to the Setup Instructions (PDF file) for information about settings. Send mail Alarm mail (notification of the time and date of an event) is sent to registered e-mail addresses when an event occurs. You must configure the settings on the setup menu in advance to send an alarm mail when an event occurs (refer to the Setup Instructions (PDF file)). Note: • A single image is attached to the e-mail. • Up to 4 addresses can be registered to receive the alarm mail. 47