Panasonic WJ-ND400K Operating Instructions - Page 108

Power Supply Turning On the Power Turn on the recorder. 1 Insert the power plug to an outlet. 120 V AC, 60 Hz for NTSC model 220 V - 240 V AC, 50 Hz for PAL model • Make sure the power source matches the power requirement of the model in use. 2 Turn on the [POWER] switch on the rear of the recorder. • The operate indicator lights and recorder/HDD check (system check) begins. • During system check, [WJ-ND400] appears on the LCD. Also, [Don't turn off] is displayed, followed by [System Checking]. • The Time display format screen appears when the system check is complete (page 40). Important: • Do not turn off the power during the power on process. • When using extension units (WJ-HDE400), turn on all extension units before turning on the recorder. Turning Off the Power Turn off the recorder. Important: • When the recorder is not in use for an extended period of time, unplug the power plug. • Be sure to turn the power on and operate once a week to check recording and playback functionality. During Recording 1 Set [Basic] - [Basic] - [Recording] on the settings menu to [Off] and stop all recording (refer to the Setup Instructions (PDF file)). 2 Turn off the [POWER] switch on the rear of the recorder after checking that the HDD indicators are off. The operate indicator goes off. Note: • Do not forget to start recording when you turn on the power. During Playback 1 Click the [STOP] button on the [HDD] tab to stop playback (refer to the Operating Instructions (PDF file)). 2 Turn off the [POWER] switch on the rear of the recorder after checking that the HDD indicators are off. The operate indicator goes off. 39