Panasonic WJ-ND400K Operating Instructions - Page 210

Maintenance Settings management Use the following procedure to save setup menu settings to the recorder and to load previously saved settings. This procedure also can be used to return setup menu settings to their initial defaults. 1 Click the [Maintenance] button on the setup menu. 2 On the sub-menu that appears, click [Settings management]. This will display the "Settings management" window. 3 Click the button of the respective item to suit your particular requirements. • Each selected item is executed. Refer to "Settings management" table for details about each item. Settings management Item User setup save User setup load Reset to the default Description Saves user setup data to the recorder. Loads user setup data saved on the recorder. Initializes settings. Important: • Even if you perform [User setup load]/[Reset to the default], the following settings cannot be loaded or initialized. ⋅ [NW link down detection] ⋅ [Bandwidth control] ⋅ [HTTP port number] ⋅ [FTP port number] ⋅ [Network settings] ⋅ [DNS Settings] • Even if you perform [User setup load]/[Reset to the default], the [Config.] - [Encryption] settings cannot be loaded or initialized. • Performing [User setup load] sets host authentication to [Off]. 81