Panasonic WJ-ND400K Operating Instructions - Page 88

Event operations include the following. • Start recording images Recording is done according to the recording duration and rate settings on the settings menu. The images from a camera before an event occurs can be recorded and linked to the event (prerecord event). • Display alarm messages A pop-up screen appears to indicate an event has occurred. • Alarm indicator blinks Alarm indicator on the front of the recorder blinks. • Buzzer sounds The buzzer sounds according to the settings on the settings menu. • The camera goes to its preset position. The camera moves to a pre-registered preset position. • Notification email sent when event occurs Alarm mail (notification of the time and date of an event) is sent to registered email addresses when an event occurs. An image can be attached to this email. Up to 4 addresses can be registered to receive the alarm mail. List of Functions Outline of Functions • Alarm signal output from the Alarm/Control connector on the rear panel of the recorder (Alarm output) When an event occurs, a signal is output from the Alarm connector on the rear panel of the recorder to sound an alarm etc. • Event log is recorded. When an event occurs, the type of event and the time it occurred are recorded in an event log. • Images recorded during events are transmitted to an FTP server. When an event occurs, images are recorded from when the event starts for a set period of time and are automatically transmitted to an FTP server. • A PC is notified of an alarm according to Panasonic alarm protocol settings. When an event or error occurs, a PC is automatically notified regarding event or error information according to the [Panasonic alarm protocol] settings. Install the software (option) on the PC designated to receive and display event or error notification. Refer to the "readme.txt" file on the CD-ROM for details about the software. Live Monitoring Function 1-screen 4-screen Sequential display Description Live images from cameras (including audio) are displayed on one screen. The camera can be operated from the recorder when one screen is displayed (refer to the Operating Instructions (PDF file)). Live images from a camera are displayed on multi-screen. Images from multiple cameras are shown in preset sequence on the screen. Recording Function Order of priority* Description Emergency recording 1 Recording is done when an emergency occurs. Event post recording 2 Recording is automatically done after various events occur. Manual recording 3 Recording of images and audio can be started and stopped manually. Schedule recording 4 Recording is done automatically during a set time period. Pre-event recording 5 Recording is automatically done before various events occur. * Order of priority: Images are recorded in the highest priority mode if more than one mode is enabled. Setup Menu List Refer to the Setup Instructions (PDF file) for information about the settings menu list. 19