Canon EOS C700 FF PL EOS C700 EOS C700 PL EOS C700 GS PL EOS C700 FF EOS C700 - Page 163

7 Network Functions About the Network Functions You can attach the optional WFT-E6 or WFT-E8 Wireless File Transmitter to the camera to connect it to a Wi-Fi network (A 164). You can also use an Ethernet cable to connect the camera to a network using a wired connection (A 168). After the camera is connected to a network, you can use the following network functions. 163 Network functions and connection types Network function Description Wi-Fi Wired network Infrastructure1 Camera Access Point2 A Browser Remote Control the camera remotely from the Web Ü - browser of a connected device. Ü 170 IP Streaming Stream the camera's live video and audio over IP to a compatible IP video decoder connected Ü Ü to the same network. - 182 Transfer clips recorded with the camera to FTP File Transfer another device connected to the network using Ü Ü the FTP protocol. - 185 1 Connection to a Wi-Fi network via an external access point (wireless router, etc.) 2 Direct connection to one Wi-Fi-enabled device where the camera serves as the Wi-Fi access point. Before using the network functions • The instructions in this chapter assume you already have a correctly configured and working network, network device(s) and/or Wi-Fi access point. If necessary, refer to the documentation provided with the network devices you plan to use. • Configuring the network settings requires adequate knowledge about configuring and using wired (Ethernet) and/or wireless (Wi-Fi) networks. Canon cannot provide support regarding network configurations. IMPORTANT • Data transmitted over networks is not encrypted. • Canon shall not be liable for any loss of data or damage resulting from incorrect network configuration or settings. Additionally, Canon shall not be liable for any loss or damage caused by the use of network functions. • Using an unprotected Wi-Fi network can expose your data to monitoring by unauthorized third parties. Also, the camera is shipped with default passwords so you can test the network functions as soon as possible. Changing the initial settings is recommended. Be aware of any data security risks involved. NOTES • Do not open the card slot covers of any recording media while using network functions. • Do not lay cables connected to the SDI OUT terminals, MON. terminal or HDMI OUT terminal near the optional Wireless File Transmitter. Doing so may negatively affect the wireless communication over Wi-Fi.