Canon EOS C700 FF PL EOS C700 EOS C700 PL EOS C700 GS PL EOS C700 FF EOS C700 - Page 26
Preparing the Main Power Supply, Acceptable Power Sources, Using a Battery
View all Canon EOS C700 FF PL manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Preparing the Main Power Supply Preparing the Main Power Supply You can power the camera using a commercially available V-mount battery or the DC IN 12V terminal. Even when a battery is attached, if a power source is connected to the DC IN 12V terminal, the camera will not draw 26 power from the battery. Acceptable Power Sources When selecting commercially available batteries and power adapters, make sure the external power source meets the following specifications and all the safety standards of the country/region where it is used. Closely follow the manufacturer's instructions regarding the use and maintenance of power sources. Power source Battery Power adapter (DC IN 12V terminal) V-mount battery, 12 V to 20 V DC Specifications 4-pin XLR plug (female connector), 11.5 V to 20 V DC, 10 A (acceptable maximum load current) Using a Battery The battery adapter for V-mount batteries comes attached to the camera. If it was removed, attach the battery adapter in advance (A 24). Attaching a Battery 1 Make sure the camera is turned off. 2 Align the V-shaped wedge on the battery to the V-mount on the battery plate. 3 Gently press the battery down until it clicks in place. ባ ቤ Removing a Battery 1 Press the Q button to turn off the camera. 2 While holding the battery release latch pressed down, slide the battery up and remove it. ባ