Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 104
show interface ets, Input ETS Reco TLV pkts, 0 Error
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Example Dell#show int te 0/2 dcbx detail E-ETS Configuration TLV enabled e-ETS Configuration TLV disabled R-ETS Recommendation TLV enabled r-ETS Recommendation TLV disabled P-PFC Configuration TLV enabled p-PFC Configuration TLV disabled F-Application priority for FCOE enabled f-Application Priority for FCOE disabled I-Application priority for iSCSI enabled i-Application Priority for iSCSI disabled ----------- Interface TenGigabitEthernet 0/2 Port Role is Auto-Upstream DCBX Operational Status is Disabled Reason: Port Shutdown Is Configuration Source? FALSE Local DCBX Compatibility mode is IEEEv2.5 Local DCBX Configured mode is IEEEv2.5 Peer Operating version is Not Detected Local DCBX TLVs Transmitted: ErPfi 0 Input PFC TLV pkts, 0 Output PFC TLV pkts, 0 Error PFC pkts 0 PFC Pause Tx pkts, 0 Pause Rx pkts 0 Input ETS Conf TLV pkts, 0 Output ETS Conf TLV pkts, 0 Error ETS Conf TLV pkts 0 Input ETS Reco TLV pkts, 0 Output ETS Reco TLV pkts, 0 Error ETS Reco TLV pkts 0 Input Appln Priority TLV pkts, 0 Output Appln Priority TLV pkts, 0 Error Appln Priority TLV pkts Total DCBx Frames transmitted 0 Total DCBx Frames received 0 Total DCBx Frames errors 0 Total DCBx Frames unrecognized 0 Dell# show interface ets Displays the ETS configuration applied to egress traffic on an interface, including priority groups with priorities and bandwidth allocation. Syntax Parameters show interface port-type slot/port ets {summary | detail} port-type slot/ port ets {summary | detail} Enter the port-type slot and port ETS information. Enter the keyword summary for a summary list of results or enter the keyword detail for a full list of results. 104