Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 260

Defaults Command Modes Command History Related Commands end-day end-month end-time end-year offset Enter the number of the day. The range is from 1 to 31. You can enter the name of a month to change the order of the display to time day month year. Enter the name of one of the 12 months in English. You can enter the name of a day to change the order of the display to time day month year. Enter the time in hours:minutes. For the hour variable, use the 24-hour format; example, 17:15 is 5:15 pm. Enter a four-digit number as the year. The range is from 1993 to 2035. (OPTIONAL) Enter the number of minutes to add during the summer-time period. The range is from 1 to1440. The default is 60 minutes. Not configured. CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. clock summer-time recurring - sets a date (and time zone) on which to convert the switch to daylight saving time each year. show clock - displays the current clock settings. clock summer-time recurring Set the software clock to convert to daylight saving time on a specific day each year. Syntax clock summer-time time-zone recurring [start-week start-day start-month start-time end-week end-day end-month end-time [offset]] To delete a daylight saving time zone configuration, use the no clock summertime command. Parameters time-zone start-week Enter the three-letter name for the time zone. This name is displayed in the show clock output. You can enter up to eight characters. (OPTIONAL) Enter one of the following as the week that daylight saving begins and then enter values for start-day through end-time: 260