Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 451
show running-config uplink-state-group, show uplink-state-group, Syntax, Parameters, Defaults, Command
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 451 highlights
show running-config uplink-state-group Display the current configuration of one or more uplink-state groups. Syntax show running-config uplink-state-group [group-id] Parameters group-id Displays the current configuration of all uplink-state groups or a specified group. The valid group-id values are from 1 to 16. Defaults Command Modes none • EXEC • EXEC Privilege Command History Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Example Dell#show running-config uplink-state-group ! no enable uplink state track 1 downstream TengigabitEthernet 0/2,4,6,11 upstream TengigabitEthernet 0/8, 12 upstream PortChannel 1 ! uplink state track 2 downstream TengigabitEthernet 0/1,3,5 upstream TengigabitEthernet 0/9,10 Related Commands • show uplink-state-group - displays the status information on a specified uplink-state group or all groups. • uplink-state-group - creates an uplink-state group and enables the tracking of upstream links. show uplink-state-group Display status information on a specified uplink-state group or all groups. Syntax show uplink-state-group [group-id] [detail] Parameters group-id Displays status information on a specified uplink-state group or all groups. The valid group-id values are from 1 to 16. detail Displays additional status information on the upstream and downstream interfaces in each group Defaults none 451