Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 367

Command History Usage Information Version 9.4(0.0) Supported on the FN I/O aggregator. Using the following example of a static route: ip route 33.33.33.0 /24 tengigabitethernet 0/0 172.31.5.43 • The software installs a next hop that is not on the directly connected subnet but which recursively resolves to a next hop on the interface's configured subnet. In the example, if gig 0/0 has an ip address on subnet 2.2.2.0 and if 172.31.5.43 recursively resolves to 2.2.2.0, Dell Networking OS installs the static route. • When the interface goes down, Dell Networking OS withdraws the route. • When the interface comes up, Dell Networking OS re-installs the route. • When recursive resolution is "broken," Dell Networking OS withdraws the route. • When recursive resolution is satisfied, Dell Networking OS re-installs the route. Related Commands show ip route - views the switch routing table. show ip route View information, including how they were learned, about the IP routes on the switch. Syntax show ip route [hostname | ip-address [mask] [longer-prefixes] | list prefix-list [process-id] | connected | static | summary] Parameters ip-address (OPTIONAL) Specify a name of a device or the IP address of the device to view more detailed information about the route. mask (OPTIONAL) Specify the network mask of the route. Use this parameter with the IP address parameter. longer-prefixes (OPTIONAL) Enter the keywords longer-prefixes to view all routes with a common prefix. list prefix-list (OPTIONAL) Enter the keyword list and the name of a configured prefix list. process-id (OPTIONAL) Specify that only OSPF routes with a certain process ID must be displayed. connected (OPTIONAL) Enter the keyword connected to view only the directly connected routes. static (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. summary (OPTIONAL) Enter the keyword summary. Command Modes • EXEC • EXEC Privilege 367