Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 115
renew dhcp interface, Parameters, interface type, Command, Modes, Default, History, Version 9.40.0
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 115 highlights
Parameters Command Modes Default Command History Usage Information interface type slot/port • For the management interface on the stack-unit, enter the keyword management ethernet followed by slot/port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. EXEC Privilege None Version 9.4(0.0) Supported on the FN I/O aggregator. When you enter the release dhcp command, although the IP address that was dynamically-acquired from a DHCP server is released from an interface, the ability to acquire a new DHCP server-assigned address remains in the running configuration for the interface. To acquire a new IP address, enter either the renew dhcp command at the EXEC privilege level or the ip address dhcp command at the interface configuration level. renew dhcp interface Re-acquire a dynamic IP address on an Ethernet interface enabled as a DHCP client. Syntax Parameters renew dhcp interface type slot/port} interface type slot/port Enter any of the following keywords and slot/port or number to clear counters from a specified interface: • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/ port information. The slot and port range is 0. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. Command Modes Default Command History Usage information EXEC Privilege None. Version 9.4(0.0) Supported on the FN I/O aggregator. The renew dhcp command is used to renew the lease of IP address obtained through dhcp. 115