Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 136
auto vlan, clear counters, Syntax, Defaults, Parameters, description, Command, Modes, Usasge
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 136 highlights
• name • show config (from INTERFACE VLAN mode) • show vlan • vlan tagged • vlan untagged auto vlan Change the port to auto or admin vlan mode (enable or disable all auto VLANs). Syntax auto vlan To remove membership from 4K VLAN, use the no auto vlan command. Defaults Parameters Command Modes Usasge Information none description INTERFACE Enter a text string description to identify the VLAN (80 characters maximum). The auto vlan command adds the port as untagged to default vlan and tagged to all other 4094 VLAN. This command is available only in Standalone mode. Command History Version 9.4(0.0) Supported on the FN I/O aggregator. clear counters Clear the counters used in the show interfaces commands for VLANs, and physical interfaces, or selected ones. Syntax Defaults Parameters clear counters interface Without a specific interface specified, the command clears all interface counters. interface (OPTIONAL) Enter any of the following keywords and slot/ port or number to clear counters from a specified interface: • For the management interface on the stack-unit, enter the keyword managementethernet followed by slot/ port information. The slot and port range is 0. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. 136