Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 238

• show logging • terminal monitor clear logging Clear the messages in the logging buffer. Syntax Defaults clear logging none Command Modes Command History EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. Related Commands show logging - displays logging settings and system messages in the internal buffer. logging buffered Enable logging and specify which messages are logged to an internal buffer. By default, all messages are logged to the internal buffer. Syntax logging buffered [level] [size] To return to the default values, use the no logging buffered command. To disable logging stored to an internal buffer, use the no logging buffered command. Parameters Defaults Command Modes level size (OPTIONAL) Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 7 or debugging. (OPTIONAL) Indicate the size, in bytes, of the logging buffer. The number of messages buffered depends on the size of each message. The range is from 40960 to 524288. The default is 40960 bytes. level = 7; size = 40960 bytes CONFIGURATION 238