Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 176
pipe-number, ip-address, Displays the destination route of the index.
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 176 highlights
Command Modes Command History Usage Information 176 pipe-number ip-address mask [longerprefix] detail member-info summary Enter the number of the Port-Pipe number. The range is from 0 to 0. (OPTIONAL) Enter the IP address and mask of a route to CAM entries for that route only. Enter the keyword longer-prefixes to view routes with a common prefix. Enter the keyword detail to display the group index ID used by the ecmp routes int he CAM. Enter the keyword member-info to display the group index used by the ecmp, the number of egress ports (members) for the ecmp, and the port details of each member. The detail information under member-info will give the MAC address, VLAN ID and gateway of every member port of the ecmp. (OPTIONAL) Enter the keyword summary to view a table listing route prefixes and the total number routes which can be entered in to CAM. • EXEC • EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. The following describes the show ip fib stack-unit command shown in the following example. Field Destination CG V C Description Displays the destination route of the index. Displays 0. Displays a 1 if the entry is valid and a 0 otherwise. Displays the CPU bit. 1 indicates that a packet hitting this entry is forwarded to the control processor, depending on Egress port. V Id Mac Addr Port Displays the VLAN ID. If the entry is 0, the entry is not part of a VLAN. Displays the next-hop router's MAC address. Displays the egress interface. Use the second half of the entry to determine the interface. For example, in the entry 17cl CP, the CP is the pertinent portion.