Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 169

Command Modes Command History Usage Information Example count value EXEC Privilege • For the management interface, enter the keyword ManagementEthernet then the slot/port information. The slot range is 0 and the port range is 0. • For a 10 Gigabit Ethernet interface, enter the keyword TenGigabitEthernet then the slot/port information. • For VLAN, enter the keyword vlan then by a number from 1 to 4094. (OPTIONAL) Enter the keywords count then the count value. The ranges from 1 to 65534. The default is Infinity. Version 9.4(0.0) Supported on the FN I/O aggregator. To stop packets from flooding the user terminal when debugging is turned on, use the count option. ICMP: echo request rcvd from src 40.40.40.40 ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply ICMP: echo request sent to dst 40.40.40.40 ICMP: echo request rcvd from src 40.40.40.40 ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply ICMP: src 40.40.40.40, dst 40.40.40.40, echo reply ICMP: echo request sent to dst 40.40.40.40: ip route Assign a static route to the switch. Syntax ip route destination mask {ip-address | interface [ip-address]} [distance] To delete a specific static route, use the no ip route destination mask {address | interface [ip-address]} command. To delete all routes matching a certain route, use the no ip route destination mask command. Parameters destination mask ip-address Enter the IP address in dotted decimal format of the destination device. Enter the mask in the slash prefix format (/x) of the destination device's IP address. Enter the IP address in dotted decimal format of the forwarding router. 169