Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 432

Command Modes Command History Usage Information EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. The following describes the show user command shown in the following example. Field Description (untitled) Line User Host(s) Location Indicates with an asterisk (*) which terminal line you are using. Displays the terminal lines currently in use. Displays the user name of all users logged in. Displays the terminal line status. Displays the IP address of the user. Example Related Commands Dell#show user Line User 0 console 0 admin * 3 vty 1 admin 172.31.1.4 Dell# ssh - enables a user. Host(s) idle idle Location ssh Open an SSH connection specifying the host name, username, port number and version of the SSH client. Dell Networking OS supports both inbound and outbound SSH sessions using IPv4 addressing. Inbound SSH supports accessing the system through the management interface as well as through a physical Layer 3 interface. Syntax Parameters ssh {hostname | ipv4 address} [-| username | -p port-number|-v {1|2}] hostname ipv4 address -l username -p portnumber (OPTIONAL) Enter the IP address or the host name of the remote device. (OPTIONAL) Enter the IP address in dotted decimal format A.B.C.D. (OPTIONAL) Enter the keyword -l followed by the user name used in this SSH session. The default is the user name of the user associated with the terminal. (OPTIONAL) Enter the keyword -p followed by the port number. The range is from 1 to 65536. The default is 22. 432