Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 323

Parameters Command Modes Command History Usage Information 0-5 all default primary secondary Enter the stack member unit identifier of the stack member. Enter the keyword all to set the primary, secondary, and default images for the system. Enter the keyword default to set the default image path for the system. Enter the keyword primary to set the primary image path for the system. Enter the keyword secondary to set the secondary image path for the system. CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. The system first attempts to load the image from the primary path. If it fails to boot, the system tries to load the image from the secondary path and if that also fails, the system loads the default image. cd Change to a different working directory. Syntax Parameters cd directory directory (OPTONAL) Enter one of the following: • flash: (internal Flash) or any sub-directory • usbflash: (external Flash) or any sub-directory Command Modes Command History EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. copy Copy one file to another location. The Dell Networking OS supports IPv4 addressing for FTP, TFTP, and SCP (in the hostip field). Syntax copy source-file-url destination-file-url Parameters file-url Enter the following location keywords and information: • To copy a file from the internal FLASH, enter flash:// then the filename. 323