Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 428

Command Modes Command History Usage Information LINE Version 9.4(0.0) Supported on the FN I/O aggregator. The software measures the period of inactivity defined in this command as the period between consecutive keystrokes. For example, if your password is "password" you can enter "p" and wait 29 seconds to enter the next letter. SSH Server and SCP Commands The Dell Networking OS supports secure shell (SSH) protocol versions 1.5 and 2.0. SSH is a protocol for secure remote login over an insecure network. SSH sessions are encrypted and use authentication. enable password Change the password for the enable command. Syntax enable password [level level] [encryption-type] password To delete a password, use the no enable password [encryption-type] password [level level] command. Parameters level level encryptiontype (OPTIONAL) Enter the keyword level followed by a number as the level of access. The range is from 1 to 15. (OPTIONAL) Enter the number 7 or 0 as the encryption type. Enter a 7 followed by a text string as the hidden password. The text string must be a password that was already encrypted by a Dell Networking router. Use this parameter only with a password that you copied from the show running-config file of another Dell Networking router. Defaults Command Modes Command History Usage Information password Enter a text string, up to 32 characters long, as the clear text password. No password is configured. level = 15. CONFIGURATION Version 9.4(0.0) Supported on the FN I/O aggregator. Use this command to define a password for a level. Passwords must meet the following criteria: • Start with a letter, not a number. 428