Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 130
debug ip igmp, ip igmp snooping flood, interface, Command, Modes, History, Version 9.40.0, Syntax
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 130 highlights
Command Modes Command History interface EXEC Privilege (OPTIONAL) Enter the interface type and slot/port information:For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. Version 9.4(0.0) Supported on the FN I/O aggregator. debug ip igmp Enable debugging of IGMP packets. Syntax debug ip igmp [group address | interface] To disable IGMP debugging, enter the no ip igmp command. To disable all debugging, enter the undebug all command. Defaults Parameters Disabled group-address interface (OPTIONAL) Enter the IP multicast group address in dotted decimal format. (OPTIONAL) Enter the interface type and slot/port information: For a VLAN interface enter the keyword vlan followed by a number from 1 to 4094. Command Modes Command History EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. ip igmp snooping flood This command controls the flooding behavior of unregistered multicast data packets.When flooding is disabled, unregistered multicast data traffic is forwarded to only multicast router ports in a VLAN. If there is no multicast router port in a VLAN, unregistered multicast data traffic is dropped. Syntax ip igmp snooping flood To disable the flooding, use the no ip igmp snooping flood command. Parameters Enabled 130