Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 383
fcoe-map, Introduced on the M I/O Aggregator and MXL 10/40GbE
View all Dell PowerEdge FX2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 383 highlights
Parameters Defaults Command Modes Command History Usage Information Related Commands fc-map-value Enter the unique MAC address prefix used by a SAN fabric. The range of FC-MAP values is from 0EFC00 to 0EFCFF. None FCoE MAP Version 9.6(0.0) Version 9.3(0.0) Supported on the FN 2210S Aggregator. Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex IO module. The FC-MAP value you enter must match the FC-MAP value used by an FC switch or FCoE forwarder (FCF) in the fabric. An FCF switch accepts only FCoE traffic that uses the correct FC-MAP value. The FC-MAP value is used to generate the fabric-provided MAC address (FP-MAC). The FPMA is used by servers to transmit FCoE traffic to the fabric. An FC-MAP can be associated with only one FCoE VLAN and vice versa. In an FCoE map, the FC-MAP value, fabric ID, and FCoE VLAN parameters must be unique. To remove a configured FC-MAP value from an FCoE map, enter the no fc-map command. fcoe-map - creates an FCoE map which contains the parameters used in the communication between servers and a SAN fabric. show fcoe-map- displays the Fibre Channel and FCoE configuration parameters in FCoE maps. fcoe-map Create an FCoE map which contains the parameters used to configure the links between server CNAs and a SAN fabric. Apply the FCoE map on a server-facing Ethernet port. Syntax Parameters fcoe-map map-name map-name Maximum: 32 alphanumeric characters. Defaults On the FN2210S Aggregator with PMUX modules, the following parameters are applied on all the PMUX module interfaces: • Description: SAN_FABRIC • Fabric-id: 1002 • Fcoe-vlan: 1002 383