Dell PowerEdge FX2 Dell PowerEdge FN I/O Aggregator Command Line Reference Gui - Page 344

Basic Interface Commands The following commands are for Physical interfaces. clear counters Clear the counters used in the show interfaces commands for all virtual router redundancy protocol (VRRP) groups, virtual local area networks (VLANs), and physical interfaces, or selected ones. Syntax Parameters clear counters interface interface (OPTIONAL) Enter any of the following keywords and slot/ port or number to clear counters from a specified interface: • For the management interface on the stack-unit, enter the keyword management ethernet followed by slot/ port information. The slot and port range is 0. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword portchannel followed by a number. Range: 1-128 Defaults Command Modes Command History Example Without an interface specified, the command clears all interface counters. EXEC Privilege Version 9.4(0.0) Supported on the FN I/O aggregator. This command is supported in Programmable-Mux (PMUX) mode only. Dell#clear counters Clear counters on all interfaces [confirm] description Assign a descriptive text string to the interface. Syntax description desc_text To delete a description, use the no description command. Parameters desc_text Enter a text string up to 240 characters long. To use special characters as a part of the description string, you must enclose the whole string in double quotes. Defaults Command Modes none INTERFACE 344